<em id="c9vre"></em>

  1. <em id="c9vre"><ruby id="c9vre"></ruby></em>
      
      
      <rp id="c9vre"></rp>
    1. <dd id="c9vre"></dd>

      <dd id="c9vre"><big id="c9vre"></big></dd><em id="c9vre"><acronym id="c9vre"></acronym></em>

      <rp id="c9vre"><ruby id="c9vre"><u id="c9vre"></u></ruby></rp><nav id="c9vre"><center id="c9vre"><video id="c9vre"></video></center></nav>
    2. <button id="c9vre"><acronym id="c9vre"></acronym></button>
      1. <rp id="c9vre"></rp>

        1. Product center

          2019-06-06

          一.Brief introduction
          CPE is the abbreviation of (chlorinated polyethylene), which is the product of high density polyethylene (HDPE) after chlorination, and its appearance is white and fine particles.

          二、Second, the performance of CPE

           1, excellent aging resistance, can be used in harsh weather and harsh environment, ozone resistance. 

          2, excellent flammability, no spontaneous combustion.

           3, excellent low temperature toughness, can maintain flexibility at-20 ℃, suitable for UPVC products impact modifier.

           4. Excellent chemical resistance, inertia to most chemicals, resistance to all kinds of acid-base corrosion. 

          5, good processing performance, easy to process and molding. 6, excellent use safety, will not have a negative impact on the human body and the surrounding environment. 7, excellent stability.

          三、Qualitative index

          index

          CPE225A

          CPE130A

          CPE135A

          CPE140A

          CPE135C

          Mass fraction of chlorine,%

          25±2

          30±2

          35±2

          40±2

          35±2

          熔融焓,J/g

          <=5.0

          <=2.0

          <=2.0

          <=2.0

          <=5.0

          Melt, J/ g

          <=0.4

          <=0.4

          <=0.4

          <=0.4

          <=0.4

          Screen residue (0.9mm screen hole),%

          <=2.0

          <=2.0

          <=2.0

          <=2.0

          <=2.0

          Number of impurity particles, per 100g

          <=50

          <=50

          <=50

          <=50

          <=50

          Shore hardness, shoreA

          <=80

          <=70

          <=65

          <=70

          <=70

          Mooney viscosity, Ml (1 4)

          ?? -

          ??? -

          -

          -

          -

          Tensile strength, MPa

          ?? >=8.0

          ?? >=8.0

          ?>=8.0

          ?>=8.0

          ?>=8.0

          Mass fraction of ash,%

          <=4.5

          <=4.5

          <=4.5

          <=4.5

          <=4.5

          index

          CM225B

          CM130B

          CM135B1

          CM135B2

          CM135B3

          CM140B

          Mass fraction of chlorine,%

          25±2

          30±2

          35±2

          35±2

          35±2
          40±2

          Melt, J/ g

          <=5.0

          <=2.0

          <=2.0

          <=2.0

          <=2.0

          <=2.0

          Mass fraction of volatiles,%

          <=0.4

          <=0.4

          <=0.4

          <=0.4

          <=0.4

          <=0.4

          Screen residue (0.9mm screen hole)%

          -

          -

          -

          -

          -

          _

          Number of impurity particles, per 100g

          -

          -

          -

          -

          -

          -

          Shore hardness, shoreA

          <=75

          <=70

          <=60

          <=60

          <=60

          <=70

          Mooney viscosity, Ml (1 4)

          ?<=140

          <=130??

          50-60

          60-70

          70-80

          <=120

          Tensile strength, MPa

          ?? >=6.0

          ?? >=6.0

          ? >=6.0

          ? >=6.0

          ? >=6.0

          ?>=6.0

          Mass fraction of ash,%

          <=4.5

          <=4.5

          <=4.5

          <=4.5

          <=4.5

          <=4.5

           

          Note: CM135B and CM140B can produce different Mooney viscosity products according to customer requirements.

                4. CPE, the main purpose of CPE, has the dual properties of plastics and rubber, and has good compatibility with other plastics and rubbers. therefore, CPE is mostly mixed with rubber or plastics except a few of them are used as main materials. When CPE is combined with plastics, it is mainly used as modifier, the most important use of which is to be used as impact modifier for rigid polyvinyl chloride (UPVC) products, improve the impact resistance and low temperature properties of UPVC, and can be used to manufacture UPVC door and window profiles, pipes and injection products. When used with rubber, CPE mainly improves the flame retardancy, insulation and aging resistance of rubber. In addition, CPE135C can be used as modifier for flame retardant ABS resin and impact modifier for injection of PVC,PC,PE.


          Last one:No Friends!

          Next article:Product display

          Jinhong Group:


          魯ICP備18057964號-1 Support:Aosion
          成年女人免费碰碰视频_亚洲精品国产品国语在线_大陆高清国产一级特黄aa大片_2020国产精品香蕉在线观看